On one of our current Rx8 builds, the car came in not running, a common occurrence. Our job is to make sure that what ever caused this to not start / run properly doesn't happen again.
Read full article
REspeed Blog
This is where we share our knowledge / experience and to let you see the work we do.
On one of our current Rx8 builds, the car came in not running, a common occurrence. Our job is to make sure that what ever caused this to not start / run properly doesn't happen again.
MazdaDoug
8 Min Read
The primary concerns regarding the Rx8 that contribute to engine failures and their underlying causes: Ignition, grounds, oil injection, front under-tray and driving it the way it was meant to be ...
MazdaDoug
5 Min Read
Renesis Engine Rebuild Part 2 | Once we have the engined disassembled, next we head over to the Ultrasonic cleaner to remove all the carbon / grease from the engine and external components.
MazdaDoug
5 Min Read
To kick off the year, we thought we would share the customer experience. What we do, and what we share with you the customer during disassembly, cleaning and the rebuild. When we take the engine ...
MazdaDoug
6 Min Read
Rotary Engine Shop Colorado | Battery Performance is something that gets left alone until something goes wrong.
MazdaDoug
4 Min Read
The Mazda Rotary Engine makes a lot of power when cooling temperatures (oil and water) are in the range of 180-195, anything higher and you lose horsepower & torque. For 90% of all rotary engined ...
MazdaDoug
6 Min Read
Rebuilding the basic Rx8 engine block is all about the details, what about everything outside the engine internals? This is a discussion we have with every customer, because the details matter ...
MazdaDoug
8 Min Read
We have a deep admiration for our rotary engines as they possess a remarkable ability to rev high, produce pleasing sounds, and harmonize perfectly with the well-balanced chassis of the Rx8. Our ...
MazdaDoug
7 Min Read
Building the FD Rotary Engine for track day / street performance
MazdaDoug
6 Min Read
As an engine builder, taking the engine apart is one of the most overlooked actions. How the engine comes apart will tell you a lot about the engine and how it was driven.
MazdaDoug
6 Min Read
ALL CATEGORIES
- all Categories
- Colorado Rotary Engine shop
- rx8 builds
- Rotary Engine REbuild
- 13b
- performance upgrades
- rebuilds
- rotary engine care
- Rotary engine repair
- 12A
- Renesis Rebuilds
- apex seals
- engine builds
- mazda rx7
- oil cooler upgrades
- oil leaks rotary
- Penske Shocks
- Penske Shocks Rx8
- Rx7 turbo Shop
- Turbo Upgrades
- Ultrasonic Clean
- cooling system upgrades
- engine rebuilds
- fuel injectors
- rx8 engine failures
- vintage racing 12A
- Coolant failures
- GSL-SE repair
- HGT sequential gearboxes
- Race Engine Builds
- Side seal Clearance
- batteries
- carb rebuild
- compression testing
- radiator upgrades Rx8
- rotor housing failures
- side housings
Click on 'All Categories' for dropdown / scroll of blog listing