We have seen a strong resurgence of the first generation of the rx7 lately, why?
Read full article
We have seen a strong resurgence of the first generation of the rx7 lately, why?
MazdaDoug
4 Min Read
Part 2 Rebuilding the Rx7 12A with performance gains and reliability Once we got the motor apart, remember this motor was running fine, drove nice and started hot and cold. The fact that I did not ...
MazdaDoug
8 Min Read
Mazda SA Rx7 classic cars | These Mazdas are becoming more fun to drive, ...not that they have become better cars, it is because they have something that the newer ones cannot do. Driving this car ...
MazdaDoug
6 Min Read
We enjoy constructing rotary engines and take great pride in ensuring every detail is meticulously handled.. On our motor builds, one thing that makes a difference is oiling system upgrades. On our ...
MazdaDoug
4 Min Read
Rotary Engine Performance | On our latest build; a 13B six port S5 motor that will have a supercharger. Crafting rotary engines is our passion, and we take immense pride in meticulously attending to ...
MazdaDoug
3 Min Read
Rotary Engine Builds for power For our climate, it is paramount that every engine build gets performance / reliability upgrades that match the application. Cooling is a big issue here in Colorado.
MazdaDoug
3 Min Read
After our blog post on common oil leaks for the rotary engine, we want to share how we go about getting things right. The dreaded oil cooler / oil rear main seal leak. These two can really make a ...
MazdaDoug
4 Min Read
Oil leaks Mazda Rotary Engine | Increase Performance When you put multiple types of materials together and push oil through them, eventually it will start to leak. The Mazda rotary engine is a ...
MazdaDoug
4 Min Read
The Rotary engine continues to be a solid performer when built properly. Assembling the motor is only one key factor of a good build. The details necessary involve more than just the individual ...
MazdaDoug
5 Min Read
Oil pumps and putting it all back together | Rotary Engine Shop Colorado After we have sanded and measured all the side seals, installed them with the springs, corner seals and made sure the apex ...
MazdaDoug
4 Min Read