Many motors are now well into their 30's in terms of age, let's look closer at the side housings of one 13B that came into the shop for a refresh.
Read full article
Many motors are now well into their 30's in terms of age, let's look closer at the side housings of one 13B that came into the shop for a refresh.
MazdaDoug
3 Min Read
Apex seals are the main wear item that leads to rotor housing failure. As horsepower goes up so does heat and expansion. Sure, the side seals do a lot of work, let's talk about the apex seal and how ...
MazdaDoug
6 Min Read
The Rotary engine continues to be a solid performer when built properly. Assembling the motor is only one key factor of a good build. The details necessary involve more than just the individual ...
MazdaDoug
5 Min Read
The primary concerns regarding the Rx8 that contribute to engine failures and their underlying causes: Ignition, grounds, oil injection, front under-tray and driving it the way it was meant to be ...
MazdaDoug
5 Min Read
Rotary Engine Builds | If you haven't had the pleasure of going to High Plains Raceway or Pueblo Motorsports Park for a track day with your daily sports car, you are missing out. What is realistic ...
MazdaDoug
3 Min Read
Oil pumps and putting it all back together | Rotary Engine Shop Colorado After we have sanded and measured all the side seals, installed them with the springs, corner seals and made sure the apex ...
MazdaDoug
4 Min Read
Exploring the realm of social media platforms, one can easily spot discussions and articles on achieving substantial power gains with the 13B rotary engine. Easy, right? Not so fast. Every online ...
MazdaDoug
7 Min Read
Building Horsepower in Colorado, serious turbo power takes a proven plan with solid components.
MazdaDoug
1 Min Read
Turbo Upgrades | Utilizing turbocharging is an excellent method to unlock the full potential of the rotary engine. With the FC turbo 2 and the FD TT as the platform, what separates the men from the ...
MazdaDoug
5 Min Read
The rotary engine has changed the porting over the years, improving performance and reducing emissions. Intake porting: This is where a lot of gains can be made, on the other side, also a lot of ...
MazdaDoug
5 Min Read